Top 10 Best 3d Print Filament Dryer Food Dehydrator {2022}

Last Update:

Our team scanned 46449 reviews available online for 3d Print Filament Dryer Food Dehydrator, choice the best one and prepared 3d Print Filament Dryer Food Dehydrator Reviews for you. It was hard to shortlist the idle 3d Print Filament Dryer Food Dehydrator from lots of products online. We evaluted to make sure that you get only the Best 3d Print Filament Dryer Food Dehydrator from our suggestions. Check the listings:

Best 3d Print Filament Dryer Food Dehydrator
As an Amazon Associate, I earn from qualifying purchases.

Comparison Chart for Best 3d Print Filament Dryer Food Dehydrator

46449 number of user reviews were available online, which we scanned to find the 3d Print Filament Dryer Food Dehydrator. Hopefully, our expert's suggestions available in this article will help you find your ideal choice.

Comparison Chart of Top 103d Print Filament Dryer Food Dehydrator

NoProductScoreAction
1Upgraded Dryer Box of 3D Printer Filament9.6Check on Amazon
2Flexzion Food Dehydrator Machine9.4Check on Amazon
3MYNT3D Super 3D Pen9.4Check on Amazon
4JAYO 3D Printer Filament Dryer Box9.4Check on Amazon
5Upgraded 3D Printer Filament Dryer Box9.2Check on Amazon
6Commercial Chef Food Dehydrator9.2Check on Amazon
7Sovol Filament Dryer, SH01 Filament Dehydrator 3D Printer Spool Holder9Check on Amazon
8Upgraded Dry Box for 3D Filament Storages8.4Check on Amazon
9Upgraded SUNLU 3D Printer Filament Dryer Box for 3D Printing8.4Check on Amazon
10YOOPAI Filament Storage Bag Vacuum Kit - 20Pack Cleaning Drying Sealed Bags (Plastic 13.2 x 12.7inch) for 3D Printer Filament8.4Check on Amazon

Table Of Content:

1. Upgraded Dryer Box of 3D Printer Filament

  • Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift.
  • Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors.
  • Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time.
  • Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm.
  • User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing.

2. Flexzion Food Dehydrator Machine

  • Easy to Use – This countertop food dryer dehydrator is a compact, user-friendly way to preserve fresh foods fast.
  • Adjustable Temperature – This small food dehydrator operates at 7 temperature settings, not only does it ensures your food are preserved at their optimal heat, but it also intensifies their flavors.
  • Stackable Trays – Comes with 5 trays for flexible and easy food display and removal, also easy to clean after use.
  • Versatile Dehydrator – Dries a wide variety of food, such as dried apricots, fruit leather, dehydrated fruit slices, banana chips, dried apple, pineapple, strawberries, peaches, pears, prunes, berries, nuts, kale chips vegetables, sweet potato sticks, dried herbs & spices, dried meat beef jerky and other dry food dried fruit snacks.
  • How it Works – The dehydrator’s heating element, fans and air vents simultaneously work to remove moisture from food.

3. MYNT3D Super 3D Pen

  • Turn your ordinary drawings into 3D works of art
  • Stepless speed slider lets you regulate flow for optimal control of material while you’re drawing
  • New: ultrasonic sealed nozzle is nearly clog-proof and provides market leading durability
  • The Super 3D Printing Pen is great for kids, artists and engineers of all ages
  • Kit includes 3 colors of ABS plastic filament A/C adapter and slim, ergonomic touch pen with 1 year limited warranty.

4. JAYO 3D Printer Filament Dryer Box

  • JAYO Filament Dryer and Storage Box: JAYO 3D printer filament dryer dry filament, which helps you reduce the impact of the objective environment on the printing of 3D filaments, getting standard printing models of most filament, such as PLA, SILK, PETG, ABS filament, etc.
  • Personalized Time and Temperature Setting: The default continuous drying time of the JAYO filament dryer is 6 hours at 50℃.
  • User-friendly Design: JAYO dryer is made up of a transparent lid, a white bottom, a 2-inch LCD screen(display temperature and time), 2 built-in rotating shafts and two buttons (set temperature and time).
  • Compatible with most 3D Filament Spools: Most widely used filament often requires 3-6 hours of drying to achieve a good printing experience and the JAYO printer filament dry box is compatible with 1 kg filament materials at the diameter of consumables line:1.
  • Partner for 3D Printer Filament: JAYO filament dryer box keeps heating up to your preset temperature and works until up to the preset time with the quiet design of less than 10dB.

5. Upgraded 3D Printer Filament Dryer Box

  • Keep dry, good printing effect】Dust-free, moisture-free.
  • Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting.
  • Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased.
  • High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours.
  • Good After-Sales Service】After-Sales Service and Technical Support are provided.

6. Commercial Chef Food Dehydrator

  • USE WITH YOUR FAVORITE FOODS—This COMMERCIAL CHEF food dehydrator removes moisture and locks in the original, nuanced flavors of your favorite snacks.
  • 5 LAYERS OF TRAYS—Considered one of the best dehydrators for food and jerky, this phenomenal kitchen appliance consists of 5 circular trays, which is enough to hold most food items and create uniform drying.
  • ADJUSTABLE THERMOSTAT RANGE—This freeze dryer machine (3.
  • EASY TO STORE & CLEAN—The trays in our fantastic meat dehydrator are dishwasher safe, ensuring easy cleanup and streamlined storage.
  • HEALTHY SNACKS—Our incredible food dehydrator helps you keep up with your New Year’s resolutions by making fast, easy, and healthy snacks.

7. Sovol Filament Dryer

  • Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure.
  • Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time.
  • Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt.
  • Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm.
  • Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly.

8. Upgraded Dry Box for 3D Filament Storages

  • Function – Dryer and Storage Box】SUNLU dry box is specifically made for the purpose of drying 3d printer filament, intended to remove moisture from a spool of filament.
  • Heating, Rotating and Constant Temperature】The storages box will keep heating up to your preset temperature, and keep working until up to the preset time.
  • Simple Yet Effective】The filament dryer box is pretty easy to use, it crams in a lot of functionality even with only two buttons, such as set temperature and time, load the data of the current temperature and the current target temperature.
  • Set Temperature and Time】The dryer box is preset to run for 6 hours at 50℃ which should be compatible with pretty much any material any diameter of the filament.
  • Quiet and Good Looking】The SUNLU filament dryer storage enclosure is very silent when it working, it can be used in your bedroom with your silence 3d printer and won’t be noisy to disturb you.

9. Upgraded SUNLU 3D Printer Filament Dryer Box for 3D Printing

  • Keep Dry】Dust-free, moisture-free.
  • Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting.
  • Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased.
  • High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours.
  • Good After-Sales Service】After-Sales Service and Technical Support are provided.

10. YOOPAI Filament Storage Bag Vacuum Kit – 20Pack Cleaning Drying Sealed Bags (Plastic 13.2 x 12.7inch) for 3D Printer Filament

  • Ideal Solution for Dust & Water Proof: with double seal zipper and micro-porous design, this YOOPAI compression container provides a provides a closed and dry storage space for your products.
  • Efficient Vacuum Kit: with self-sealing valve on the storage bag and a tiny hand pump, YOOPAI allows you to create a vacuum state for your filaments in a few seconds to keep them in tip-top shape and portable.
  • All-round Moisture Monitoring: cobalt-free humidity indicator cards go for having a quick view of the humidity level of your filaments without opening the bags; the included desiccant serves as a double insurance for a dry space.
  • High Quality & Broad Compatibility: maded of food grade PE+PA composite material, this BPA-free environment friendly storage bag is safe, durable and recyclable; especially designed for 3D printer filament of 0.
  • More Bags in Package: one YOOPAI vaccum kit includes filament storage Bag × 20, Hand Pump × 1, Sealing Clip × 5, Desiccant × 5, Humidity Indicator × 5.

How To Choose The Best 3d Print Filament Dryer Food Dehydrator

Does the thought of finding a great 3d Print Filament Dryer Food Dehydrator stress you out? Has your mind been juggling between choices when it comes to buying 3d Print Filament Dryer Food Dehydrator in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect 3d Print Filament Dryer Food Dehydrator for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about 3d Print Filament Dryer Food Dehydrator. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best 3d Print Filament Dryer Food Dehydrator in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best 3d Print Filament Dryer Food Dehydrator currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.


Top 3d Print Filament Dryer Food Dehydrator brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top 3d Print Filament Dryer Food Dehydrator based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the 3d Print Filament Dryer Food Dehydrator before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the 3d Print Filament Dryer Food Dehydrator they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good 3d Print Filament Dryer Food Dehydrator, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your 3d Print Filament Dryer Food Dehydrator before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable 3d Print Filament Dryer Food Dehydrator will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good 3d Print Filament Dryer Food Dehydrator if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated 3d Print Filament Dryer Food Dehydrator on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our 3d Print Filament Dryer Food Dehydrator on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any 3d Print Filament Dryer Food Dehydrator featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a comment

Your email address will not be published.